BBQ Installation on my wife's 2005 Raptor 3612DS


After several seasons of lugging the Weber Gas Grill and propane bottle around, I decided to get a smaller BBQ and also something that was a little easier to manage.  Pretty simple installation.  The mounting bar was screwed to the small horizontal vent hatch (which is never used anyway).  Just remember, if to use large washers on the back side to prevent the nut from pulling through the thin fiberglass.  Also, you can see how easy it connects to my gas nipple that I installed.

 

05-19-2011... I have had a couple of emails on the BBQ make/mode: 
Camco 57305 Olympian 5500 Stainless Steel Barbeque Grill (Click Here).   Amazon.com seems to have the best price.

My only recommendation is that you use a mounting plate (piece of steel behind the panel) if you are going to mount it to the kicker door in the back like I did.

 

If you have any questions, please feel free to contact me at bkirkpatrick@email.com or you can call my cellular phone (562-843-4043).  I spend a lot of time with my family at Lucerne, Ocotillo Wells, Glamis, and along the coast.  These were just some improvements that I needed to do.

Thanks,  Brendan

Back to Index for other completed projects